DESCRIPTION
The High-Speed
The PCW5000-HS is the fastest Portable Winch in the line-up. It is therefore ideal for jobs requiring more speed than power, such as pulling cable or installing fiber optics.
Design
Using the same successful design as the PCW5000, the PCW5000-HS is built with a gearbox optimized for speed and comes with 85 mm capstan drum as standard. So, at 36 meters per minute, it pulls a load three times faster than its predecessor, making it perfectly suited to pulling smaller loads over a long distance. In addition, the winch's capstan drum concept allows users to pull loads over an unlimited length of rope, without loss of power, in a simple, effective and safe way.
Performance
The PCW5000-HS develops a pulling force of 350 kg, without mechanical advantage. By adding a pulley system, you can go up to five times (5x) the pulling force. That means, with two double pulleys, you could pull up to 1,750 kg!
| Series | Industrial |
| Designed in | 2011 |
| Motor/Engine | Honda GXH50 4-stroke Air-cooled 1.6 kW - 2.1 HP @ 7,000 tr/min |
| Powered by | Unleaded gasoline, 86 octane or higher |
| Drive/Clutch | Direct drive (no clutch) |
| Rope Retention System | No |
| Drum turns when motor/engine is idling | Yes |
| Pulling Capacity | |
| Standard drum (single line / double line) | Ø 85 mm: 350 kg / 700 kg |
| Optional drum (single line / double line) | Ø 57 mm: 500 kg / 1,000 kg |
| Lifting Capacity | |
| Standard drum (single line / double line) | Not designed for lifting |
| Optional drum (single line / double line) | --- |
| Speed | |
| Standard drum | Ø 85 mm: 36 m/min |
| Optional drum | Ø 57 mm: 24 m/min |
| Weight | 16 kg |
| Dimensions (overall) | 37.1 cm x 36.6 cm x 36.6 cm |
| Gearbox | Aluminium alloy. Heat treated 3-stage spur gears. Shafts mounted on ball bearings. Oil bath lubrication. |
| Gear ratio | 53:1 |
| Brake | Anti-reversing roller clutch bearing |
| Rope (not included) | Low stretch double braided polyester |
| Length | Unlimited |
| Minimum Breaking Strength (MBS) | 1,100 kg |
| Minimum diameter | Ø 10 mm |
| Maximum diameter | Ø 13 mm |
| Recommended diameter | Ø 12 mm |
| Included | Polyester sling - 60 mm x 2,5 m |
| Warranty | Once purchased, register your winch online and get 1 additional year of warranty for FREE! |
| Private use | 5 years |
| Commercial use | 1 year |
| Motor/Engine | Honda International Warranty |
| Certification(s) | CE, UKCA |